Skip to content

SIMPSON 80150

A single 31-inch cold-water wand rated 4500 PSI, with an M22 gun thread, a 1/4 inch QC nozzle end and a 90-day warranty.

Simpson 31 inch pressure washer wand extension with M22 thread and quick connect nozzle end

SIMPSON 80150

A single 31-inch cold-water wand rated 4500 PSI, with an M22 gun thread, a 1/4 inch QC nozzle end and a 90-day warranty.

What it is
One wand — not a kit, not a nozzle set
Length
31 inches, and the catalog 800 mm (31.5 in) confirms it at 31.5
Pressure rating
Up to 4500 PSI — the highest on this shelf
Temperature limit
140 °F, stated as cold water only
Weight
181 g (6.4 oz) — the only published weight on this shelf
Nozzle end
Industry standard 1/4 inch quick connect
Gun end
Industry standard M22 thread — see the FAQ on the two M22 sizes
Named gun fit
Simpson spray guns 80147 and 80148
Warranty
90 day limited accessory — the only term on this shelf
Nozzles included
None
Reference
80150 at the catalog, 80479 in the title
Material
Not published
Curved rods
None — it is straight
Amazon reference
B07HJT9DHP
EAN
0879399006302
  • Publishes a weight, a warranty, a temperature limit and named compatible guns, which nothing else here does
  • 4500 PSI, the highest rating on this shelf
  • Twenty-nine dollars ninety-nine for one wand, where the Xiny Tool is ten pieces at the same price

Best for: Adding thirty-one inches to a gun you already own, especially a Simpson 80147 or 80148

≈ $30
Check price on Amazon

Specifications

What it is
One wand — not a kit, not a nozzle set
Length
31 inches, and the catalog 800 mm (31.5 in) confirms it at 31.5
Pressure rating
Up to 4500 PSI — the highest on this shelf
Temperature limit
140 °F, stated as cold water only
Weight
181 g (6.4 oz) — the only published weight on this shelf
Nozzle end
Industry standard 1/4 inch quick connect
Gun end
Industry standard M22 thread — see the FAQ on the two M22 sizes
Named gun fit
Simpson spray guns 80147 and 80148
Warranty
90 day limited accessory — the only term on this shelf
Nozzles included
None
Reference
80150 at the catalog, 80479 in the title
Material
Not published
Curved rods
None — it is straight
Amazon reference
B07HJT9DHP
EAN
0879399006302

What the maker puts in writing

  • “Specifications: Length – 31 inches; Max temperature - 140° F; Max PSI – 4500; Nozzle Connection – Industry standard QC; Spray Gun Connection – industry standard M22; Suggested best fit Simpson Spray Gun Models – 80147, 80148”
  • “This attachment features an industry standard QC nozzle connection, and an industry standard M22 threaded spray gun connection, providing a universal fit that is easy to hook up to nozzles, surface cleaners, and spray guns”
  • “This power washing wand/lance extension works with most pressure washers with ratings up to 4500 PSI… Please note this extension is only for cold water use”
  • “This 31-inch pressure washer wand/lance extension provides power for household power washing tasks; perfect to clean your car, driveway, patio, sidewalk, siding, and more”
  • Description: “Spray Wands are equipped with 1/4” QC connections for easy attachment of spray tips and other accessories… 90 Day limited accessory”
  • Catalog: 181 g (6.4 oz) · 800 × 25 × 25 mm (31.5 × 0.98 × 0.98 in) · reference 80150 · title reference 80479

One wand, at the price of ten pieces

$29.99 for a single 31-inch tube.

The Xiny Tool at the same price is ten pieces with six nozzle tips and a gutter rod. The three-rod Selkie at $29.49 is nine pieces with five nozzles and twenty O-rings.

On quantity there is no argument. So the case has to be made on something else, and it can be.

This is the only item on the shelf that publishes a weight — 181 g. The only one that publishes a warranty — 90 day limited accessory. The only one that names the guns it fits — Simpson 80147 and 80148. The highest pressure rating here — 4500 PSI, against 4000 everywhere else. And one of only two that publish a temperature limit — 140 °F, with the consequence spelled out in words.

Which makes it a different purchase rather than a worse one. If you already own a gun and want one solid extension, this is that. If you want approach angles for gutter work, this is straight, and the curved rods on the kits are the entire reason they exist.

A hundred and eighty-one grams, and why that is the number to notice

It is the only published weight on this shelf, and it is the figure that makes a long wand usable.

181 g for 31 inches. Against it: the Selkie bullet claims 4.3 pounds — about 1950 g — for its nine-piece kit, and presents the weight as a virtue (“is weighter than others”) on a tool you hold above your head.

Why it matters is leverage. A wand is a lever with your wrists at the fulcrum, and at full extension the mass at the far end is multiplied by the length. Add the water inside, add the jet’s own reaction force pushing back, and the thing that stops the job is your forearms, not the dirt.

At 31 inches and 181 g, this is light enough to hold out one-handed. That is the trade for not having six more tubes.

The TOR at $91.99 is the only item on this shelf that treats weight as a design problem at full length: “premium lightweight aluminum”, a “padded grip”, and a “lengthened support belt to save your strength during use.”

And the length checks. 31 inches claimed, 800 mm at the catalog — which is 31.5 inches. On a shelf where one listing publishes three different lengths on one page, a figure that survives conversion is worth saying out loud.

The M22 trap, which this listing does not avoid

“an industry standard M22 threaded spray gun connection, providing a universal fit.”

M22 comes in two sizes that share the name. M22-14mm and M22-15mm differ in the diameter of the inner nipple. They thread together and then either refuse to seal or seal and blow.

This says M22 without the cote. The TOR is the only item on this shelf that specifies it — “M22-14mm male thread outlet” — and on the pressure-hose shelf of this same site the fittings are consistently M22-14mm, the commoner domestic size.

So “universal fit” is doing more work than the thread allows.

Where the listing more than compensates is by naming the hardware instead: “Suggested best fit Simpson Spray Gun Models – 80147, 80148.” If you own one of those, the question is closed, and no other item on this shelf offers that certainty.

The nozzle end is not at risk. A 1/4 inch quick connect either clips or it does not, and it is the one genuinely standard fitting in this category — shared here with the Xiny Tool, both Selkie kits and the AURORA CAR nozzle.

Worth noting what the QC end also opens up. The description says it takes “spray tips and other accessories”, and bullet two names “surface cleaners” — the flat rotary plates for driveways. Thirty-one inches between gun and surface cleaner is the difference between stooping and standing.

Four thousand five hundred, which is headroom rather than power

A wand’s pressure rating is a ceiling it will survive, not a pressure it creates. Nothing on this shelf makes pressure; the pump does.

So 4500 PSI means this is rated above anything a household is likely to own. Domestic electric washers rarely exceed 2000 PSI; the petrol machines on this site’s shelves reach the low 3000s.

The shelf: this 4500 · Xiny Tool 4000 · both Selkie 4000 · TOR “up to 4,000” · AURORA CAR 1000 to 4000 · YunGuoGuo and POOPLE nothing at all.

But the pressure ceiling is not the one that will stop you. The temperature is.

A hundred and forty degrees, and the sentence that spells it out

“Max temperature - 140° F” — and, in plain words, “Please note this extension is only for cold water use.”

That is the clearest compatibility statement on the shelf, and only the Xiny Tool publishes the same figure (without the warning).

What it rules out: hot-water contractor machines, which run at 180 °F and above, and — this is the one people try — anything from a steam cleaner. The steam shelf on this site runs between 212 and 293 °F, with saturated steam at 4 bar near 291 °F.

The steel does not mind. The seals do, and that is what the limit describes.

Read the two ceilings together and the picture is specific: a cold-water wand with a very high pressure ceiling. Which suits a powerful petrol washer, and rules out a heated one.

Ninety days, which is the only warranty here

“90 Day limited accessory.”

Short, and the only actual term on this shelf. Everything else offers service instead: the AURORA CAR has a “24-hour customer service team”, the TOR “superior customer service”, and the rest publish nothing.

Ninety days on a part with no moving pieces is really a cover for manufacturing faults — a bad thread, a weld, a seal — and those show up in the first few uses or not at all. So it is the right length for what it covers.

Two part numbers on one listing

The title ends “Universal Fit, 80479”. The catalog reference is 80150.

Which is a problem precisely because of how good the rest of the compatibility information is. The one thing you would do with a Simpson part number is quote it when ordering a matching gun or a replacement, and the page gives you two.

The guns it names — 80147 and 80148 — are the figures to rely on.

What is not published

No material. “High-quality Simpson construction” is the whole of it. Both Selkie kits publish “stainless steel with brass fittings”, the Xiny Tool “solid stainless steel”, the POOPLE an “aluminum alloy” tube with a brass connector, the TOR aluminum. At 181 g for 31 inches this is almost certainly not stainless, and the page declines to say.

No nozzles. None included, where the Xiny Tool ships six tips and the Selkie kits five each. Budget for a set, or the AURORA CAR rotary at $13.99, which fits the same 1/4 inch QC.

No curved rod, so no gutter geometry. If that is what you came for, the kits are the answer.

No O-rings or spare seals, where the Selkie kits ship twenty washers and the Xiny ten. One wand has two joints rather than ten, which is the mitigating fact — fewer joints is the real advantage of a single wand over a stack.

No M22 size, as above.

And no stated extension limit — nothing says whether two of these may be joined, which is the obvious question for someone who finds 31 inches not quite enough.

Availability

Read on the day this page was built: $30 at the American Amazon shop.

Read from Keepa on the day this page was last revised; stock and price both move without notice.

Prices quoted in this text were read on 2026-10-04. The live price is at the top of the page.

The questions we hear

Why pay the same for one wand as for a ten-piece kit?

For four pieces of published information and a warranty, and whether that is worth it depends on what you own. At $29.99 this is a single 31-inch wand. The Xiny Tool at the same price is ten pieces with six nozzle tips; the three-rod Selkie at $29.49 is nine pieces with five nozzles and twenty O-rings. On quantity there is no contest. What this publishes that none of them do: a weight (181 g (6.4 oz)), a warranty (90 day limited accessory), a named gun compatibility (Simpson 80147 and 80148), and the highest pressure rating on the shelf at 4500 PSI. It also publishes a temperature limit — 140 °F, cold water only — which only the Xiny Tool matches. So the case for it is specific: you already own a gun, you want one solid extension rather than a stack of six that sags and leaks at ten joints, and you want the thread and the ceiling stated rather than inferred. The case against is equally specific: if you need approach angles for gutter work, this is straight, and the curved rods on the kits are the whole reason to buy them.

What is the M22 trap, and does this listing avoid it?

It does not, and this is the one compatibility risk on the page. Bullet two says "an industry standard M22 threaded spray gun connection, providing a universal fit". M22 comes in two sizes that share the name: M22-14mm and M22-15mm, which differ in the diameter of the inner nipple. They thread together and then do not seal, or seal and then blow. This listing says M22 without the cote. The TOR at $91.99 is the only item on this shelf that specifies it — "M22-14mm male thread outlet" — and on the pressure-hose shelf of this same site the fittings are consistently M22-14mm, which is the commoner domestic size. Where the listing does get specific is better than a thread spec: it names the guns. "Suggested best fit Simpson Spray Gun Models – 80147, 80148." If you own one of those, the question is settled. If you own something else, check which M22 your gun takes before ordering, because "universal fit" in bullet two is doing more work than the thread allows. The nozzle end is not at risk: a 1/4 inch quick connect either clips or it does not.

Does 4500 PSI mean anything on a domestic machine?

It means headroom, not performance, and that distinction is worth being clear about. A wand’s pressure rating is a ceiling it will survive, not a pressure it creates. Nothing on this shelf makes pressure; the pump does. So 4500 PSI tells you this wand is rated above every pressure washer a household is likely to own — domestic electric machines rarely exceed 2000 PSI, and the petrol ones on this site’s shelves reach the low 3000s. For comparison: the Xiny Tool and both Selkie kits are rated 4000 PSI, the TOR "up to 4,000", the AURORA CAR nozzle 1000 to 4000, and the two garden-hose wands publish nothing at all. Where the rating earns its keep is on a hot-water or contractor machine, and there the other figure bites first: "Max temperature - 140° F" and "this extension is only for cold water use". A commercial hot-water washer runs well above that, and it is the seals that go, not the tube. So read the pair together — this is a cold-water wand with a very high pressure ceiling, which suits a powerful petrol machine and rules out a heated one.

All lances & nozzles