The bottom line The accessory that changes what a pressure washer is worth. Buy it with the machine, not two summers later.
The T-Racer T 5 is a hood containing two rotating flat jets, with the distance to the surface adjustable — which is the whole reason to buy this rather than a cheaper fixed head.
Height is the control that matters
A surface cleaner concentrates the machine’s output into two spinning jets a few millimetres from the ground. Too close, and softwood decking goes furry and old stone gets etched. A few millimetres higher and the same machine cleans without leaving a record of every pass. Fixed-height heads have one setting, and it is the wrong one on at least one of your surfaces.
What the hood does
It keeps the spray off the wall you are standing beside, and off you. A bristle ring around the rim holds the dirt inside the housing rather than throwing it a metre up the render. Anyone who has cleaned a patio with a bare lance knows why that is not a luxury.
Flow, not just pressure
The jets are driven by the water passing through them, so a machine with modest flow spins them slowly and cleans less evenly. This head suits mid-range and upward machines; on an entry washer with unpublished flow, expect a slower pass.
Availability
One reference across all six Amazon stores, including the United States.
What we like, and what we don't
Strengths
Adjustable jet height — the single control that protects a soft surface
Bristle ring and hood keep the dirt off the wall and off you
One reference on all six Amazon stores
Compromises
Kärcher fitting only: it will not go on a Bosch or Nilfisk machine
Flat jets under a hood mean you cannot see what you are cleaning
Needs enough flow to spin properly — weak machines turn it slowly
Specifications
Jets
Two rotating flat jets
Height
Distance to the surface adjustable
Splash protection
Hood plus bristle ring
Handling
Jet pressure lifts the head so it floats over the ground
Fitting
Kärcher K-series bayonet
Amazon reference
B0854Z2CK4
EAN
4054278513652
Questions people actually ask
Why is adjustable height the important feature?
Because the distance between a flat jet and the surface decides how much energy reaches it. Close in, the jets strip timber fibres and etch soft stone; a few millimetres higher, they clean without marking. A fixed-height head is set for one surface and used on all of them, which is how terraces end up with visible passes.
Will it work on my machine?
Only if the machine is a Kärcher K-series with the bayonet fitting. Nilfisk's Click&Clean, Bosch's connector and the M22 thread used by trade machines are all different. Adapters exist and add a joint at the highest-pressure point in the system — buy the head for your own fitting where you can.
Our score
8.7/ 10
The accessory that changes what a pressure washer is worth. Buy it with the machine, not two summers later.
Who this one is for, among cleaning machines
Kärcher owners with a terrace, a drive or a patio of any size
Set beside the neighbouring cleaning machines
cleaning machines from the same category, at nearby prices. Only what all of them publish is shown: a column with holes compares nothing.
Choosing a Surface Cleaner for a Pressure Washer | CleanVerdict
Pressure Washer Terrace Kit That Won’t Mark the Stone | CleanVerdict
Price and availability, for cleaning machines
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom, United States. Listed is not the same as in stock — availability changes daily.
Details checked on August 15, 2026.
Sources
Specifications: the manufacturer sheet for cleaning machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.